We all need a way to stretch our dollars especially when it comes to making cards! What better than a FREE stamp set.... Epic Celebrations is a FREE stamp set only available until 3/31/2018! Purchase $50 in supples/stamps and you can have it for FREE!!
Stampin' Up has some fantastic DSP (Designer Series Paper)!!! Here is a project for Valentines Day that uses mainly DSP and a few other things you probably have in your stash already.
This awesome exploding box which is super easy to make and you only need DSP, some adhesive, stickers, heart framelits, and a score board! Who doesn't have that in their stash. If you don't have a score board, you can always use a paper trimmer with the cutting channel as the score channel......
Here are the details:
12 x 12 sheet of DSP (I used Painted with Love). Score it at 4" on all sides
5 7/8" square piece of cardstock (I used a pink scrap from my stash but you could use Melon Mambo). Score at 7/8" on all sides.
6 x 6" Power Pink cardstock to create the mini box on the inside. Score at 2" on all sides
3 1/2" square piece of cardstock (I used the same pink scrap as the lid, but you could use Gold Foil). Score at 5/8" on all sides.
5 of the largest hearts in the Sweet & Sassy framelits cut from DSP. Score in half.
Several gold foil heart themed stickers. I had these in my stash.They are from Paper Wishes.(You could use the Painted Love Gold Vinyl Stickers.)
1 smaller heart from the Sweet & Sassy framelits from DSP. for the top of the mini box.
Once you have all the pieces cut and scored, you will then need to cut the corners off forming a triangle at the corners.Next score the middle of those triangles. (see example photo).
Then you fold all the scroe lines according to the picture. When you get ready to make the lid, you need to miter the corner pieces. Be sure to cut into the squares formed at the corners and not the lid sides. (see example photo). You will want to use either Fast Fuse or Tear N Tape.
Now that you are an expert box and lid maker, repeat these steps for the mini box on the inside. Use either Fast Fuse or Tear N Tape to adhere the mini box in the center of the middle square.
Embellish the inside of the large box with the gold foil stickers. Fold the hearts in half. Glue one side and place it on the box lid. Continue glueing one side and place on tope of the folded heart. Keep doing this until you get to the last heart. On the last one, you will glue it on both sides. you should place it on the edge of your Silicone Mat and then glue one side to the heart stack, carefully remove the mat and glue the other side next to the stack making a fanned heart as shown in the pictures above.
You are done! Now you have a beautiful sturdy box to house any valentine gift.
Think about using this for other occasions just changing up the paper and decorations......
YES!!! The Fast Fuse BOG2 is back!!
Remember back in October we had a Fast Fuse promotion and it sold out in a FLASH??
Stampin' Up has made good on their promise... Starting tomorrow February 8th UNTIL SUPPLIES LAST through February 12th, if you buy one Fast Fuse adhesive (129026) you will get TWO refills ($15 value)!!!!!! For those who are not familiar with Fast Fuse, it is the replacement of "RED TAPE" back in the day...... Great stuff!!
I am certain this will not last until Monday the 12th so place your order early!!!
I have finally finished all the cards in this kit and I still have lot's of supplies left from the kit! I stopped after 24 cards - whew! I am really pleased with these cards. They are all 4.25 x 5.5" which is a standard A2 mailing size card. I have lots to share about this kit deconstruction so here is the scoop.
Extra Supplies you will need from your stash:
6 Whisper White cardbases
5 Basic Black cardbases
5 Sahara Sand cardbases
Clear sequins of various sizes
Powder Pink Ink
Sahara Sand Ink
Wink of Stella
16 White Envelopes size A2
5 - 4 x 5.25" Whisper White Card Inserts (for the black cards)
Fine Tip Liquid Glue
Nuvo Drops: Black Crystal, Clear Crystal, Clear Green, Clear Pink
I know that seems like a lot. Except for the Nuvo Drops, you probably have it all in your supply stash already.
Now for what you will have left over after making these fabulous 24 cards:
10" Lemon Lime Twist Ombre Ribbon
4 - Sahara Sand Hexagon mats
3 - 3 x 3" White mats
2 - 1.5 x 2.5 Print mats
3 - 5/8" x 3 3/8" Stripe mats
8 - 2 x 3.5" Sahara Sand mats
7 - 2 1/2" x 4 5/8" Sahara Sand mats
1/4 x 3 1/4" gold strip
I grouped these pictures by like sentiments. I cut apart all the cards elements that were not sized for mailing. I saved ALL the gold after taking out what was pre-cut, I cut down the left over for more strips.
I opened up all the small envelopes and cut out the striped insides to use as card mats, only throwing away the flaps.
I cut the card bases in half and used them for mats as well.
I also have all the instructions for you to print out in a PDF document complete with individual pictures!!! Click HERE for the file!
Please give me feedback on these! I would really like to know if this is something you are interested in - getting more cards from your kits. If you leave me a comment by 1/21/2018 by 11:59 PM about this type of post, I will enter your name in a drawing for a set of 5 of these cards!
This is the first card of 23 and counting..... This Lots of Happy Card Kit is a super way to get your card stash jumpstarted for the year! I centered all the elements on the card instead of concentrating them closer to the top as the kit suggests. I only added 5 sequins from my stash to give it a little more shine. I am still putting card elements together so stay tuned and hopefully if my day job slacks up a bit, I will have them completed for you with instructions. The kit originally makes 20 cards. However, only 4 of the twenty were sized for mailing. ALL of the cards I am making will be sized for mailing! I have only added a few sheets of Whisper White, Sahara Sand, and Basic Black cardstock cut in half to make the additional full size cards.
Let me know what you think of this one......
The Lots of Happy Card Kit has to be my "must have" from the new 2018 Stampin Up Occasions Catalog! When I saw this kit, I really wanted to use the new Stampin Blends with it, but alas the paper used is regular cardstock and I don't think it will hold up to the blending of the alcohol markers. However, I have started coloring my pieces and I am using the Watercolor Pencils along with the 4 that come in the kit and I am loving it - it is a bit slow though....
I really love the neutral colors of the base pieces in this kit as it will be easy to use any color scheme for these images - not just the scheme that Stampin Up suggests - which is totally me. Also, they have a refill kit that is available as well. It does not include the stamps, block, ink spot, or the 4 watercolor pencils.but is still a really good price.
These are the stamps that come in the kit. Thinking I would use the Stampin Blends , I did not stamp my images with the Basic Black ink spot that came in the kit, but I used a Memento Ink Pad instead. These stamps are going to be so useful on other cards after I finish this kit!!! They are a really good size and would be a good starter set for someone just starting to stamp; plus I discovered they are compatible with the new Tailored Tag Punch!
This kit really is all inclusive. You will need scissors and maybe some extra adhesive, but that is it - unless you are going to tear apart your kit as I have done... As is, the kit makes 20 cards. However, some of those cards are not sized big enough to mail - so I am making my kit, with a few other items from my stash, into ALL cards that are big enough to mail!!! I am hoping to have that post for you next Friday so stay tuned.